Sculpsure Coolsculpting Edmonton
Over the past couple of years, we were able to put some special combination of different machines and topical cream to be able to get REAL results with REAL people. Our Most Popular Protocol showed an average loss of 5 inches in the most stubborn body areas.[expand title="Read More" swaptitle="Less"] Many people have been struggling with having excess fat. This usually affects both men and women. There are various reasons as to why many people are doing their best to eliminate excess fat. [expand title="Read More" swaptitle="Less"] However, most of all can be summarized by the need to have that body figure which resembles a model. This has been common among women, and this has led to more research which has introduced scientifically proved methods and one of that s described well here. This Page will discuss some of the most popular brands of body shaping. However, the best combination is usually decided after the free consultation.[/expand]
What is the Sculpsure Body Slimming Machine?
This is a non-invasive method which works very well to eliminate the excess fat that you don’t want. It is a laser-based procedure which is used for a variety of body types to help both men and women. It allows dealing with a variety of areas simultaneously and usually takes a few minutes before it is over. This is a non-invasive procedure which has become popular in the removal of fat. It is important because it does not leave any surgical scars and there is no anesthesia required. This makes the procedure take a short duration, and there is no time wasted for recovery.
Why you should choose the procedure?
There are many non-invasive methods, but this method has remained the procedure of choice for a variety of reasons. This method is time-efficient as it always takes a maximum of 25 minutes. [expand title="Read More About Sculpsure Here" swaptitle="Less"]Therefore, it saves a lot of your time and therefore, you will be able to attend the other activities without any compromise. This procedure will not make you have any pain as it does not involve any incision. The heating of the fat cells usually requires just a little higher temperatures of about 42 degrees which are conducive in that there is no harm on the skin. It has been shown that over 90% of the clients have reported satisfaction from this procedure.
How to prepare for the Treatment?
This method requires you to discuss with your healthcare provider in the area where you want to remove excess fat. Therefore, in this stage you will know the number of sessions you will need to get the results. You should ensure that you consult your doctor shortly before the procedure and you will have gathered a lot of information on what to do. In this situation, you are required to inform your doctor if you have any medical condition and the type of drugs you are taking. This will help your doctor to plan for your procedure and also determine whether you are fit for it. After this, you will be instructed to avoid some medication that usually causes bruising or bleeding such as NSAIDs-ibuprofen and the rest.
How Does the Sculpsure work?
It is essential that you know how the method will work for you. First, this procedure utilizes the laser technology whereby it works by lipolysis of the excess fat in the region of the body you want-‘Melting` the fat. Your doctor will instruct you to be in an inclined position and then ensure that you are comfortable. This is usually followed by marking the areas where you want to eliminate the fat. This is followed by having the device wrapped around the area with excess fat resembling a belt. This device is then switched to deliver temperatures of about 42 degrees which is enough to eliminate the excess fat, but it does not affect any other tissue. It is done in such a way that there are episodes of cooling alternated with heating episodes. It is a short procedure which usually takes about 25 minutes, and it also allows you to relax as it goes on. The cells heated during the process are eliminated by the lymphatic system usually after around 12 weeks after treatment.
The results to expect?
This procedure usually involves the use of a belt that is designed to work under certain heat conditions and wavelengths which help to eliminate the excess fat from a variety of areas. Therefore, this procedure after being approved by the FDA, it has been shown to produce good results in the following areas. The flank areas of the abdomen and The areas around the upper and lower abdomen. The above is the information about the sculpsure procedure, and it has been shown to be effective. Therefore, as described it is a useful method of eliminating fat and shaping the body.[/expand]
COOL SCULPTING ALTERNATIVES IN EDMONTON
A lot of people find it extremely difficult to lose stubborn fat. They even subjected themselves to rigorous exercise routines and diet, but all to no avail. Love handles, belly fat, back fat, saddlebag thighs, spare tires, etc. are usually products of genetics and don’t come about on their own. Getting rid of fat from those areas was only possible via surgical procedure or cosmetic surgery called liposuction.
This invasive method of fat removal was costly, so only the well-to-do could afford it. It was also a risky procedure which could go south in several unpalatable ways. But thanks to recent advancements in technology, you can lose whatever stubborn fat you have in almost any area of your body. This is possible through the new and innovative non-surgical procedure known as CoolSculpting. CoolSculpting fat-freezing procedure deals with the non-invasive elimination of stubborn fat that resists all effort through exercise and diet. This tried-and-true non-surgical substitute developed by Harvard scientists employs a process that targets and cools or freezes excess fat cells in any given area of the body.
FAT REMOVAL AND BODY SHAPING USING COOLS CULPTING IN EDMONTON
What Results to Expect after Treatment?
[expand title="Read More About CoolSculpting Here" swaptitle="Less"]
Does CoolSculpting Treatment Work for Body Shaping?
CoolSculpting can aid body shaping, though the effectiveness depends on two criteria:
- The target area the patient wants to treat must have pinch-able fat
- The skin tone of the patient must not have too much laxity or excess skin.
Patients that meet these standards are excellent candidates for this procedure. If you are also looking to minimize or tone up specific areas of your body which retain unnecessary fat, despite dieting and exercises, then CoolSculpting will work for you.
Are CoolSculpting Treatments Expensive?
The price for undergoing CoolSculpting procedure depends mainly on the areas you intend to target, the number of treatments you will need and your final goal. Most patients opt for treatments that covers multiple areas of their bodies to achieve their objectives. For belly and thigh areas, the cost of CoolSculpting ranges between $1,200 and $1,600 respectively. The typical price for this treatment on love handles is around $700-$1,400. Treating the butt area will cost you nothing less than between $700-$800.[
What Should I Do Before CoolSculpting Treatment?
Your physician is in the best position to advise on what to do and what not to do before your CoolSculpting treatment. However, the following are some of the things you must do before the day of your CoolSculpting treatment: [expand title="Read More" swaptitle="Less"]
- Keep away from supplements or medications such as fish oil, aspirin, etc. These medications have blood thinning attributes which can make you susceptible to inflammation or bruising.
- Do not damage the skin around the target areas for CoolSculpting treatment
- Eat healthy foods before your CoolSculpting procedure Do not tan the skin around the target areas for treatment
- If you are a smoker, you shouldn't smoke for approximately one week before your CoolSculpting session.
Here are the things you should do on the day of your CoolSculpting treatment
- Ensure that you wear comfortable and loose clothing. If you are female, you should wear a bra and underwear
- Eat a light meal before showing up for your session
- Bring a change of clothes in case the gel that is applied to your skin stains your clothes
- Take along your iPad, book or magazine that will occupy your attention throughout the session
- Be ready to take a few pictures of the target areas before the treatment commences. This is to help you spot the changes quickly at the end of the session
Who Can't Have CoolSculpting Treatment?
CoolSculpting is beneficial and extremely effective, but unfortunately, it is not for everyone. It is not the right program for treating obesity or for skin tightening. It is also not the correct procedure if you have:
- Paroxysmal cold hemoglobinuria
- Cold agglutinin disease
Consult your doctor before commencing the process.
What Should I Expect During CoolSculpting Treatment?
CoolSculpting procedures can take from one to more than a few hours, though this depends mostly on your treatment plan. You will not need to take or use any pain medication or topical anesthesia. You will experience moments of intense tingling, stinging, cramping or aching. But these sensations diminish when the area becomes numb.
What Are the Side Effects of CoolSculpting Treatment?
During the procedure, you may feel some sensations of tugging, pulling, mild pinching, aching, intense cold, cramping, and stinging at the target site. Once the area becomes numb, these sensations reduce significantly. Following the CoolSculpting process, the usual side effects include swelling, temporary redness, firmness, blanching, tenderness, and bruising. You may also experience skin sensitivity, itching, cramping, and aching. For a submental procedure, expect to perceive a sensation of fullness at the back of your throat.
These effects are not permanent and will subside within some days or weeks. You should, however, ask your doctor if CoolSculpting is right for you before undergoing the treatment.
How Many Treatments Will Provide Results?
Your CoolSculpting doctor is responsible for creating a treatment plan that is bespoke. It will be customized to fit your personal goals. The length or duration of your CoolSculpting treatment varies since it depends on the number of areas you want to treat during one visit.
The latest or state-of-the-art CoolSculpting equipment can treat one patient within 35-60 minutes, even if the patient has more than one treatment during the same appointment. A few practices employ the use of multiple CoolSculpting tools along with applicators. This makes it possible to treat various areas at once.
What are the post CoolSculpting treatment precautions?
You should eat right at all times and ensure that you keep on with your exercises.
What Are the Advantages of CoolSculpting Treatments?
Fat cells – unlike with exercise and diet – are destroyed and eliminated from the body. This implies that the same cells cannot return or become enlarged with weight gain.
Additionally, this procedure offers low risk and a natural-looking result. Your skin remains intact, which means the risk of scarring or infection is non-existent. Disclaimer: we do not have coolsculpting at our clinic and this article is posted for educational purposes only. Oher systems that use the same cryolipolysis principal such as coolshaping is available. Albany Cosmetic and Laser center in Edmonton is one of a very few clinics in Edmonton that offers such treatments[/expand]
We do not have the brandname cool sculpting or Sculpsure in our clinic but we have our own protocle for bosy shaping with comperable or even better results.